Description
Models: BSC-1100IIB2-X, BSC-1300IIB2-X, BSC-1500IIB2-X and BSC-1800IIB2-X
Voltage options: 110V / 60Hz or 220V / 50–60Hz
Product Description
The BIOBASE AC Series Class II Type B2 Biological Safety Cabinet is a total-exhaust containment workstation designed for laboratory procedures requiring personnel, product and environmental protection. Its airflow system provides 0% air recirculation and 100% external exhaust, making it suitable for applications where contaminated air must be discharged through a properly engineered facility exhaust system.
Each cabinet features dual ULPA filtration, a motorized laminated-glass front window, microprocessor controls, real-time LCD monitoring, audible and visual safety alarms, stainless-steel work surfaces and an integrated UV decontamination system. The cabinet is supplied with an exhaust blower and duct connection components for site installation. Manufacturer specifications are shown on page 1 of the supplied technical sheet.
Principal Technical Specifications
| Specification | Manufacturer Specification |
|---|---|
| Cabinet classification | Class II, Type B2 |
| Airflow configuration | 0% recirculation; 100% exhaust |
| Tested front opening | 200 mm / 8 inches |
| Maximum front opening | 480 mm |
| Inflow velocity | 0.53 ± 0.025 m/s |
| Downflow velocity | 0.33 ± 0.025 m/s |
| Filtration | Two ULPA filters |
| Filter efficiency | 99.9995% at 0.12 µm |
| Filter monitoring | Filter-life and pressure indicators |
| Control system | Microprocessor control |
| Display | LCD status and operating-value display |
| Front window | Motorized, two-layer laminated toughened glass, ≥6 mm |
| Noise level | ≤65 dB |
| Illumination | ≥1000 lux |
| Electrical consumption | 1300 W |
| Electrical outlets | Two waterproof sockets; 500 W combined maximum load |
| Work-zone material | Type 304 stainless steel |
| Cabinet body | Cold-rolled steel with antibacterial powder coating |
| Mobility | Footmaster leveling casters |
Lighting Configuration
| Model | UV Lamp | LED Work Lighting |
|---|---|---|
| BSC-1100IIB2-X | 30 W × 1 | 12 W × 2 |
| BSC-1300IIB2-X | 30 W × 1 | 14 W × 2 |
| BSC-1500IIB2-X | 40 W × 1 | 16 W × 2 |
| BSC-1800IIB2-X | 40 W × 1 | 16 W × 2 |
The UV system includes an operating timer, lamp-life indicator and approximately 253.7-nanometer UV output. Interlocking controls help prevent unsafe simultaneous operation of the UV lamp, blower and front window.
Safety and Monitoring Features
The microprocessor system continuously monitors inflow velocity, downflow velocity, filter condition, exhaust-filter pressure, UV operating time, cabinet humidity and system operating time. Audible and visual warnings are provided for abnormal airflow, unsafe front-window height, filter replacement, excessive filter pressure and abnormal power interruption.
Additional features include automatic airflow-speed adjustment, power-failure memory, appointment-timing controls, front-window anti-pinch logic, remote control, foot-operated window adjustment and a removable work area designed to support cleaning and maintenance.
Standard Accessories Included
- Base stand and leveling casters
- Exhaust blower and exhaust duct
- Remote control
- Foot switch
- Two LED lamps
- Two UV lamps
- Two waterproof electrical sockets
- Drain valve
Optional equipment includes water and gas taps, an electrically height-adjustable base stand and an armrest.
Ordering and Installation Notice
This Type B2 cabinet must be connected to a compatible, externally exhausted facility ventilation system. Site review should address exhaust capacity, duct routing, room-air balance, electrical service, rigging access and applicable biosafety certification requirements before shipment.
Manufacturer-document discrepancy requiring confirmation
The uploaded pricing image identifies the quoted units as “IIA2-X,” while the requested models and technical datasheet identify them as “IIB2-X.” The quote image also lists slightly different external dimensions from the technical sheet. The listing above uses the B2 technical specifications and treats the supplied prices as provisional manufacturer-quoted prices. Written manufacturer confirmation of the B2 model designation, dimensions and pricing should be obtained before accepting a paid order.
